Set Time: Press MENU button, then press OK. Now the hour is highlighted, Press UP or DOWN to change the hour. Once the hour is set, press the RIGHT button to set the minute. When the minute is highlighted, scroll UP or DOWN to change. Once the hour and minute is set, press the OK button to save the changes.

***Make sure to press OK, if not changes will not be saved***

Set Date: Press the MENU button, then press DOWN, then press OK. Press UP and DOWN buttons to change the month. Then press RIGHT, and use UP and DOWN buttons to change the day. Then press RIGHT, and use UP and DOWN buttons to change the year. Once the full date is correct, press OK to save changes.

Additional Features:

Time Mode: Example:12 Hour 8:28 OR 24 Hour 20:28. The default is 12 Hours if that is the preference no changes are needed. If you would like to change to 24 Hours. Press MENU Press DOWN to Time Mode then press the the OK button under Time Mode to highlight 12/24 hours. Then Press the RIGHT button to choose 24 hours. Then press OK to save changes.

Date Mode: Example: 10 December 1937 OR December 10 1937. The default is Month Day Year. If you prefer Day Month Year Press MENU Date Mode OK then press RIGHT button to choose Day-Month-Year. Then press OK to save changes.

Language: The default language is English if you would like to change the language press MENU then press DOWN until you see Language then press the OK button to highlight language, then press RIGHT button to choose language, then press the OK button to save changes.

Day Cycle Mode: Allows you to display Morning, Afternoon, Evening, & Night.

There are 3 options in this mode:

OFF: Clock will only display the day, date, & time.

Advanced: Clock will display the day, date, & time plus the time of day. This mode will NOT switch to morning after midnight. It will display NIGHT until 6:00AM then it will change to Morning

Normal: Clock will display the day, date, & time plus the time of day.

Automatic Brightness: When turned ON, clock will automatically dim itself at 7:00PM. Clock will resume full brightness at 7:00AM. When turned OFF, the clock will remain at full brightness at all times. The default is ON if you would like to change this setting to full brightness at all times. Press MENU then scroll DOWN to Automatic Brightness then OK then RIGHT then OK.

Alarm: To set an alarm, you must make sure to set the following options: Set Time, Set Date, & Activate Alarm. All of the other fields are optional.

Press MENU, then scroll DOWN to SET ALARM, then select Alarm and press OK. The OK button will always highlight the field that is being changed.

***When setting an Alarm the MENU button will act as the back button***

Set Time: Use UP and DOWN buttons to change time. Then press OK to save changes.

Then scroll DOWN and Set Date.

Then scroll DOWN and Set Repeat If you are setting a 1 time alarm, you can skip this step and leave it on the default (No Repeat) If you would like the alarm to sound only on certain days or all days, press OK under No Repeat and select which days you want the alarm to go off by scrolling DOWN and pressing OK to check off each day. Then press MENU to save changes.

Tag: You may select a category, then press OK to save changes. You can also leave this blank.

Activate Alarm: Make sure to select ON, and then press OK to save changes. Finally, press the MENU button until you are back at the main screen.

Thank You For Choosing Clear Clock

support@clearclock.com

888-508-0707